Which Bearing?

All bearings on RCbearings.co.uk are at least ABEC 1 in quality. This grade is better then some models are sold with new. So you can confident that the bearings purchased through us will be up to your RC demands..

We currently stock two different types of shielding for our bearings. These are metal and rubber shield, both offering a different level of bearing protection.

These bearings are best used when contact with dust and dirt is going to be at a minimum. Metal shielded bearings offer the lowest friction resistance but will not hold out the dirt as well as rubber shields. So for that reason we recommend they are use in models that will be kept on tarmac and indoors. They also perform very well within gearboxes as these are sealed. If kept clean these bearings will enjoy a long life, but will degrade quickly if they become dirty.

These bearings are best used when you know your model is going to be exposed to dirt. The rubber shields produce more friction, but help slow the ingress of dust and dirt. These bearings are strongly recommended when your RC model is going to be run off road. We strongly advise using them throughout your Buggy, Truggy or Monster Truck. The life of these bearings greatly depends on how severe the conditions are in which they are used. Water is the biggest enemy of any bearing; try to dry your model before storage.

Most of our bearings run on metal balls with light grease used as a lubricant. If looked after, these will have a lengthy life. Even so, you are advised to replace bearings in highly stress areas often. These include diffs, clutches and wheels. We currently have a small selection of ceramic balls for use in clutches. These balls have a much greater life, and can withstand the load and heat for longer. If you are serious about racing, then get a serious bearing.